Gin-Pfc Bidirectional Unidirectional Collet Shaper 3- Jaw Puch Former

• Customization: Available
• After-sales Service: All The Lift-Time of Machine
• Warranty: 1 Year
• Model NO.: GIN-PFC 51200
• Automatic Grade: Manual
• Precision: High Precision
• Certification: GS, ISO 9001
• Condition: New
• Material: Sks3
• Height of Center: 80-81mm
• Three-Grip Aperture: φ16mm
• Index Plate Tooth: 24
• Index Plate Accuracy: 15±10
• Trademark: GIN
• Origin: China
• HS Code: 845710
• Production Capacity: 30000 Piece/ Per Month

Product Description

Product Description

GIN-PFC 3- JAW Puch Former  
bidirectional unidirectional collet shaper

Features:
·Three jaw chuck
·Clamp firm
·Clear engraving
·Accurate and durable

With up and down left and right adjustment function, it is especially suitable for the processing of oval punches. When using this product, you can quickly polish various shapes of punches

·Multi-angle trimming clamping force is strong
·Center penetration hole
·With bow arm

Clear scale hard handle
It has the function of dressing grinding wheel, and can be used for dressing all kinds of cutting grinding wheel and its Angle composed of straight line and arc

 

Product Parameters

 

Part number	51150 PFB
Main features of product	1. In addition to the PFA features, PFB punch shaper has a special center perforation hole, which can be extended to make the long punch and the top shot. 2. Unable to move left and right due to the perforation design. Therefore, PFB1 accessories are specially designed to be used together with the function of dressing the Angle of the grinding wheel.
Product name	Unidirectional punch shaper
The number of teeth and precision of the indexing plate	24,15±5
Height of center	80-81MM
Through-hole diameter	Less than 30MM
Clamping bias accuracy	Within 0.005MM
Trim wheel R arc radius	Convex arc maximum R48MM
Dressing wheel diameter	Max. ∅200MM
Trim wheel R arc radius	Concave arc Max R100MM
V-groove clamping diameter	4-30MM

 

Part number	GIN-PFA 51100
Main features of product	1. The bidirectional punch molding machine is suitable for forming surface grinding machine, which can grind the punch of various shapes accurately and quickly, and can be used for the electrode processing of the discharge machining machine tool. 2. This product is equipped with a bow arm, which has the function of dressing grinding wheel, and can be used for dressing all kinds of cutting sand wheels composed of straight lines and arcs and their angles. 3 Due to the different outer diameter of the workpiece, V-shaped blocks must be used to adjust the gear and adjust its center accuracy within 5UM.
Product name	Fine display bidirectional punch shaper
The number of teeth and precision of the indexing plate	24,15±10
Height of center	80-81MM
V-block adjustment amount	30MM
Clamping bias accuracy	Within 0.005MM
Trim wheel R arc radius	Convex arc maximum R48MM
Dressing wheel diameter	Max. ∅200MM
Trim wheel R arc radius	Concave arc Max R100MM
V-groove clamping diameter	4-30MM
Upper and lower motion range of block V	25MM each

 

Part number	GIN-PFC 51200
Main features of product	1.The three-claw punch shaper is used with the flat wood bed, milling machine, etc., which is easy to clamp, easy to disassemble, convenient and quick to use. 2.Due to the cumulative tolerance of the three-claw chuck, the clamping of different workpieces will be different, so the design has the concentricity adjustment function of the horizontal adjusting machine, and the operation can be adjusted by itself
Product name	3- JAW Puch Former
The number of teeth and precision of the indexing plate	24,15±10
Height of center	80-81MM
V-block adjustment amount	30MM
Three-jaw aperture	16MM
Three jaw chuck repeated holding accuracy	Within 0.015MM
Rotation accuracy of main seat	Within 0.003MM
Through-hole diameter	16MM
Minimum clamping diameter outside diameter	2MM
Maximum clamping diameter outside diameter	70MM
Minimum clamping diameter inside diameter	24MM
Maximum clamping diameter outside diameter	64MM

 

Detail 1
Multi-angle trimming
Can be used for arc, polygon, round and other Angle molding grinding

Detail 2
Handwheel design
The handwheel design is installed on the handle to make the data positioning accurate

Detail 3
Support positioning holes save time and effort
The barrel clip shaper features a front-facing ER barrel clip, high rotation accuracy and can be used without adjusting the center, and the fine adjustment accuracy is less than 0.005 through the hole design can grip long workpieces

 

 

Detailed Photos

Our warehouse

 

 

Certifications

FAQ

Q1. Are you a manufacturer or a trading company?
We are a professional CNC equipment company enterprise, and have fittings and accessories. We warmly welcome you to visit our factory.

Q2, Do you accept OEM brands?
Yes, we have OEM service, we have rich OEM experience.

Q3. Are there any samples for quality testing?
Our company does not have samples of auxiliary materials

Q4. Do you have any certificates?
Yes, we have BSCI, ISO, FSC, MPA certificates.

Q5. How do you guarantee quality?
Product quality is the basis of good customer service. On the one hand, we adhere to innovation, the introduction of excellent talents, equipment and technology, fully achieve product quality to meet customer needs, on the other hand, the use of advanced management methods, especially quality inspection management.

Q6. What are your payment terms?
Telegraphic transfer 30% as deposit, 70% before delivery, different amounts determine different payment methods. Before you pay the balance, we will show you photos of the products and packaging.

Q7. What's your delivery time?
Generally, it takes 15 to 40 working days after receiving your advance payment. But the exact delivery time depends on the goods and quantity you order.